Product Description:
F18C is a lubricant containing polytetrafluoroethylene (PTFE) solid particles, which provides both lubrication and cleaning effects. After the solvent evaporates, the surface layer consists of PTFE particles, offering extremely low friction, dust resistance, and excellent lubrication and cushioning properties. It can be used over a wide operating temperature range and is suitable for hard-to-lubricate equipment under extreme conditions, extending lubrication cycles while providing comprehensive protection.

The dry film lubricant can penetrate and adhere to surfaces of metals, paper, wood, rubber, plastics, glass, and most other components requiring lubrication, forming a non-sticky lubricating film that prevents direct contact between friction surfaces, thereby reducing wear.

Key Features:

• Wide operating temperature range: -40℃ to 200℃

• Long-lasting, maintenance-free lubrication

• Non-flammable, no flash point

• Chemically inert: does not react with oxygen or liquid oxygen, resistant to aging

• Low volatility at high temperatures, no coking or sedimentation

• Non-migratory and stable at high temperatures

• Resistant to steam, strong acids, alkalis, and over 2000 chemical substances

• Excellent material compatibility and outstanding electrical insulation

• Insoluble in water and most solvents

• Compatible with almost any engineering plastic or elastomer

• Excellent film-forming, load-bearing, and lubricating properties

• Easy application: no pollution, no adhesion, naturally even film thickness, economical

• Load-bearing capacity three times that of conventional lubricants

• Good water resistance and rust protection when applied to metal parts

• Environmentally friendly: ozone-safe, short drying time, non-toxic, odorless, non-irritating

• Compliant with EU environmental standards: RoHS, PFOS-free, halogen-free

Precautions:

• Contains solvents: ensure adequate ventilation

• Wash hands before eating or smoking after use

• May cause skin or eye irritation

• Use appropriate personal protective equipment

• In case of contact with eyes or skin, rinse immediately with plenty of water and seek medical attention if necessary

• Wash hands thoroughly after handling

Application Methods:

• Brush coating

• Dip or adhesion coating

• Easy and uniform application

• Clean surface before application; allow to dry, then apply by one of the above methods

• Apply in a well-ventilated area; no impact after drying

Storage Instructions:

• Seal the can promptly after use to prevent evaporation; store in a cool, dark place

• Store in a dry, cool place, away from heat sources

• Avoid contact with oxidizers, strong acids, and alkalis

Limited Warranty Information – Please Read Carefully:
The information provided herein is accurate to the best of our knowledge. However, as conditions and methods of use are beyond our control, this information cannot replace customer testing to ensure safety, effectiveness, and suitability for a specific end-use. Recommendations provided should not be considered a guarantee against infringement of any patents.

Packaging:

• 6 kg / carton, 1 kg / can

Safety Information:
This document does not include all safety information required for safe use. Before use, read the product’s Safety Data Sheet (SDS) and container labels for information regarding safe handling, health hazards, and precautions. SDS can be requested from the manufacturer.

Applications:

• For lubrication of CD-ROM and DVD-ROM tray slide rails.

• For lubrication of telescopic lenses and internal mechanisms in cameras, camcorders, and optical instruments.

• For lubrication of plastic components where other wet lubricants are not suitable.